Micromotors - QS-25

You are here
Back to product list

Collision sensors | small payload | QS-25

Uniquely designed to help protect your automation equipment - from laboratory to car construction, our collision sensors meet your productivity issues.

With moments trip point from 0.3 to 30 Nm, small payload collision sensors will be the most appropriate models for your applications such as pick and place or dispensing.

  • Dynamically variable collision sensor that operate on air pressure. Breakaway threshold adjusts to match the working force ranges of robot/application
  • Non compressive, metal to metal seal for reliable and consistent operation
  • Opening of QuickSTOP air chamber at impact, pressure exhaust and switch signal stop the robot


  • Senses angular and compressive forces. QuickSTOP’s unique design offers protection in X, Y and Z axis
  • Linear and angle strokes available to remove the forces from end of arm tooling and robot wrist at trip point
  • Performance readiness is monitored by QuickSTOP. When pressurized, the switch indicates that the QuickSTOP is reset in proper position


  • Minimize down time, quick reset, no need for recalibaration, stopping robot at source of impact allows for easy identification of cause
  • Minimize robot and expensive end of arm tooling damage during robot programing. A must for any education or robot training cell
  • Easy to implement, simple to adjust pressure level according application, quick return on investment

Repeatability - X, Y 0,01 mm
Repeatability - Z 0,01 mm
Rotational Repeatability ± 0,02 °
Axial Compliance Vertical 3,40 mm
Compliance Angle 5 °
Rotary Compliance No limit
Torque Trip Point 1.0 - 6.4 Nm
Moment Trip Point 1.0 - 6.4 Nm
Weight 0,260 kg
Diameter 63,5 mm
Profile 32,0 mm
Center of Mass 18,6 mm
Average response time 4-7 ms
Dust Protection Foam collar supplied
Switch High reliability aircraft snap acting type. UL/CSA approved. Average cyclelife : 7 million cycles
Operating Pressure 1.0 - 6.0 bar
Operating Temperature Min. 0°C / Max. 70°C

Notice : The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.

No files actually

For more information

Contact us

You are not connected

You must be logged in to download the steps

Please login or create an account

The Collision Sensors are designed and manufactured by Applied Robotics, Inc.
Product Engineering Services is the Distributor of Applied Robotics for the territory of Belgium and France

Related applications

no applications actually