Languages

Micromotors - QS-7500

You are here
Back to product list

Collision sensors | heavy payload | QS-7500

Uniquely designed to help protect your automation equipment - from laboratory to car construction, our collision sensors meet your productivity issues.

With moments trip point from 150 to 2300 Nm, heavy payload collision sensors will be the most appropriate models for your applications such as handling of larger and heavier items.

  • Dynamically variable collision sensor that operate on air pressure. Breakaway threshold adjusts to match the working force ranges of robot/application
  • Non compressive, metal to metal seal for reliable and consistent operation
  • Opening of QuickSTOP air chamber at impact, pressure exhaust and switch signal stop the robot

Advantages

  • Senses angular and compressive forces. QuickSTOP’s unique design offers protection in X, Y and Z axis
  • Linear and angle strokes available to remove the forces from end of arm tooling and robot wrist at trip point
  • Performance readiness is monitored by QuickSTOP. When pressurized, the switch indicates that the QuickSTOP is reset in proper position

Benefits

  • Minimize down time, quick reset, no need for recalibaration, stopping robot at source of impact allows for easy identification of cause
  • Minimize robot and expensive end of arm tooling damage during robot programing. A must for any education or robot training cell
  • Easy to implement, simple to adjust pressure level according application, quick return on investment

QS-7500
Repeatability - X, Y 0,04 mm
Repeatability - Z 0,01 mm
Rotational Repeatability ± 0,03 °
Axial Compliance Vertical 12,68 mm
Compliance Angle 4 °
Rotary Compliance 25°
Torque Trip Point 1007 - 2098 Nm
Moment Trip Point 472 - 1049 Nm
Weight 16,800 kg
Diameter 288,0 mm
Profile 115,0 mm
Center of Mass 73,0 mm
Average response time 4-18 ms
Dust Protection Foam collar supplied
Switch High reliability aircraft snap acting type. UL/CSA approved. Average cyclelife : 7 million cycles
Operating Pressure 1.0 - 6.0 bar
Operating Temperature Min. 0°C / Max. 100°C

Notice : The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.

No files actually

For more information

Contact us

You are not connected

You must be logged in to download the steps

Please login or create an account

The Collision Sensors are designed and manufactured by Applied Robotics, Inc.
Product Engineering Services is the Distributor of Applied Robotics for the territory of Belgium and France

Related applications

no applications actually