Languages

Slip rings - SVTS C 05-T-A-00/00-XXX-E1G

You are here
Back to product list

Slip rings | 0 Circuits | SVTS C 05-T-A-00/00-XXX-E1G

Through hole, I.D. 38.1 mm, O.D. 99.0 mm, 6 to 48 circuits and more with Ethernet option Ethernet (100BASE-TX ou 1000 BASE-T) or integrated pneumatic rotary joint option

Slip ring for transmission of electrical power and/or electrical signals with through hole for shaft or rotary union. E1M/E1G option comes with an Ethernet channel (100BASE-TX or 1000BASE-T) over a Cat5e cable and 0P1/0P2 option offers an integrated pneumatic rotary joints and 6 to 24 power circuits.

The SVTS C 05 series is charaterized by a through hole and uses a special technology.

It allows to get multiple contact points between brushes and rings, low contact electrical resistance, reduced noise and low wear. No lubrication required.

SVTS C 05 models offer E1M and E1G options embedding shielded twisted pairs and adapted rings shapes to suit high data rate applications up to 1Gb/s. E1M options has 2 shielded twisted pairs and is suitable for 100 Base-TX applications (Ethernet 100Mb/s, EtherCat, Profinet, ...), option E1G has 4 shielded twisted pairs to meet 1000 Base-T applications needs. For applications where a rotary air channel is needed 0P1/0P2 option allows you to use 6 to 24 power circuits with an integrated pneumatic rotary joint.

Advantages

  • Ideal for electrical power and signal transmission
  • Through hole 38 mm
  • Integrated specific network Cat5e cable
  • Integrated pneumatic rotary joint
  • Low friction torque
  • High lifetime and reliability
  • Compliant to CE and ROHS

Benefits

  • Transmission of electric power/signals and fieldbuses in one unit
  • Mountable directly on the shaft avoiding other mounting parts
  • Available options that mitigate integration costs
  • Combinable with fluidic rotary joints and FORJ
  • Good quality/price ratio

SVTS C 05-T-A-00/00-XXX-E1G
Outside Diameter 99.00 mm
Inside Diameter 38.10 cm
Overall Length (L) 69.20 mm
Protection rating IP54
Data Transfert <=100Mbit/s, <=1Gbit/s
Mounting Thru-bore 38.1mm

Mechanical features

Nominal speed >400 rpm
Temperature range -20°C to +80°C (-40°C as option)
Contact gold-gold (alloy)
Bearings Miniature high-precision stainless steel ball bearings
Connector -
Mounting

ABS

Electrical features

Voltage 240 VDC/VAC
Cables Silver plated / PTFE insulated / colour coded
Cables length 250 mm standard (other length on request)
Dielectric voltage strength 500VAC @ 60Hz @ 60 sec
Insulation resistance >500MOhm/500VDC
Dynamic contact resistance <10mOhm @ 6VDC and 500mA (@ 5rpm)
Expected lifetime 107 revolutions (depending on speed, environmetal conditions and size)

Customisations

  • Cables
  • Materials
  • Mechanical design
  • Flange

Notice : The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.

You are not connected

You must be logged in to download the steps

Please login or create an account


The Slip rings are designed and manufactured by Servotecnica SpA.
Product Engineering Services is the Distributor of Servotecnica for the territory of Belgium and France