Grippers | Parallel 2 jaws | CHP234-B-80-NO
Parallel type Cube Gripper, stroke from 6 to 60mm

Each of the 6 series model provides 2 kinds of stroke and 2 different jaws orientation (horizontal and vertical). These grippers are equipped with dust seals and allow magnetic sensors installation on their body.
Advantages
- Compact-Lightweight-Fast
- Silent mechanism
- Quick and simple integration
- Large opening angle
- Position sensors
Benefits
- No maintenance
- Very short cycle time
- Excellent power/volume ratio
- Low air consumption
Related industries
CHP234-B-80-NO | |
---|---|
Courses | 80 mm |
Air consumption | 17.900 mm³ |
Function | Normal open |
Max cycle per minute | 60 cycles |
Gripping force* | 138.0 N |
Weight | 1.44 kg |
Max. length of attachment from finger end | 100 mm |
Max. weight of one attachment | 0.40 kg |
Type | Parallel 2 jaws |
* The values of gripping force in the above table indicates pressure at the top edge of the fingers when gripping with pressure of 5 bar.
Operating conditions
Working media | Filtered air |
Operating pressure | 3 to 7 bar |
Working temperature | 5 to 60°C |
Lubrication | Normally not required (but if necessary, use ISOVG32 compliant lubricant) |
Repeatability | Initial value : ± 0.1 mm, after 2 million cycles : ± 0.2 mm |
Lifetime | 2 million cycles (with balanced load on each finger) |
Notice : The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.
You are not connected
You must be logged in to download the steps
Please login or create an account
The Gripper are designed and manufactured by NKE.
Product Engineering Services is the Distributor of NKE for the territory of Belgium and France
Related applications
No applications actually