Skip to main content

Gripper| Angular 2 jaws |CHR636

Special Type 180° Opening Gripper

The CHR630 Series consists in 4 gripper models providing strong gripping forces thanks to their linking mechanisms. Since the gripper is wide open, the work can be transferred without retracting it.


These grippers can be equipped with proximity sensors and dust cover for CHR634 and 636 models.

Advantages

  • Compact-Lightweight-Fast
  • Silent mechanism
  • Quick and simple integration
  • Large opening angle
  • Position sensors

Benefits

  • No maintenance
  • Very short cycle time
  • Excellent power/volume ratio
  • Low air consumption

CHR636
Course184-4°
Air consumption21000 mm³
FunctionDouble effet
Max cycle per minute60 cycles
Gripping force*96.000 N
Weight0.620 kg
Max. weight of one attachment0.110 kg
TypeAngular 2 jaws

*The values of gripping force in the above table indicates pressure at the top edge of the fingers when gripping with pressure of 5 bar.

Operating conditions

Working mediaFiltered air
Operating pressure3 to 7 bar
Working temperature5 to 60°C
LubricationNormally not required (but if necessary, use ISOVG32 compliant lubricant)
Repeatability*Initial value : ± 0.1 mm, after 2 million cycles : ± 0.2 mm
Lifetime2 million cycles (with balanced load on each finger)

Notice :The provided technical data are the higher limits recommended in static condition. To obtain the correct dimensioning of the product, it is necessary to hold account of all the applicable dynamic forces, including the inertia of the manipulator, the configuration of the tools and the external forces applied.

No files actually

For more informations

Contact us

No files actually

For more informations

Contact us