Slip Ring | 3 circuits | SVTS E 04-R-A-03/00-XXX-003
Power around a large central passage, without unnecessary housing
The SVTS E04-003 is an open through-bore slip ring designed to transmit three high-power 60 A circuits through a continuously rotating axis. Its 60 mm through-bore is the largest central passage in the standard SVTS E range and facilitates integration around large shafts or mechanical axes.
This configuration integrates three 60 A power circuits and supports voltages up to 400 VAC or 400 VDC. It is intended for rotating equipment requiring high current capacity while maintaining a three-circuit architecture. Nominal speed is 300 rpm, with higher speeds available on request.
The open IP00 architecture allows direct integration of the slip ring into the machine structure. Mechanical and environmental protection can therefore be designed according to the specific requirements of the equipment.
The SVTS E04-003 is particularly suitable for special-purpose machinery, large rotary tables and OEM equipment requiring three power supplies rated up to 60 A while maintaining a 60 mm central passage.
Advantages
- 60 mm through-bore
- 130 mm outer diameter
- 3 high-power circuits rated at 60 A
- Voltage up to 400 VAC / 400 VDC
- Nominal speed up to 300 rpm
- Higher speeds available on request
- Open IP00 architecture
- Dynamic contact resistance below 10 mΩ
- Expected lifetime up to 10⁸ revolutions depending on operating conditions
- Compliant to CE and RoHS
Benefits
- Allows three power circuits rated up to 60 A to be transmitted while preserving a 60 mm central bore
- Meets the needs of machines requiring both high electrical current and a large through-shaft or mechanical assembly
- Maintains power transmission directly around the main axis without reducing the available mechanical passage
- Provides the largest central bore in the E Series while maintaining a cost-effective open design that can be integrated directly into the machine
